How I setup my lights – LED Shirt

This is the seventh post in my series on how I setup my christmas lights

Links to rest of series:

This post focuses on my LED shirt.
To see it in action check it out on youtube

My LED shirt is actually an apron I wear under a plain t-shirt (so the shirt can still be washed 😉 ) It is made from a 5m led strip running on 5V The strip is 150 individual WS2811 pixels split into 15 sections of 10 pixels. The entire strip is connected to a Pixel-Wifi (ESPPixelstick clone) powered by a small USB battery. The Pixel-Wifi support E1.31 so the shirt is treated as a small matrix in my display. I made the apron from some fabric scraps my wife had – the strips are then sewn onto the apron with some electrical tape keeping them in spot.

 

How I setup my lights – Palm trees, carport and roofline

This is the sixth post in my series on how I setup my christmas lights

Links to rest of series:

This post focuses on the palm trees, carport and roofline

We have three large palm trees in the yard – the middle one supports the mega tree while on the two other I have attached two 5m strips (split into four 2.5m sections) to each tree.
Along the guttering I have attached pixel strip. The strip is cable-tied to electrical conduit (to keep it straight) and the conduit connects to clips attached to the underside of the guttering.
I the carport I have attached strips via cable-tie. One strip for each cross-member (four in total)

How I setup my lights – Windows, Singing Tree and tune-to sign

This is the fifth post in my series on how I setup my christmas lights

Links to rest of series:

This post focuses on the windows, the singing tree and my tune-to sign

The windows each have a string of 50 pixels hanging up around them. They are connected to the window frame via cable ties to staples. The staples stay in all year so put up/take down just requires adding/removing the cable ties
The singing tree is made from 233 pixels pushed through a sheet of corrugated plastic bought from Bunnings. I drew out the shape of the tree then used a 12mm hole-punch to make suitable holes for the pixels to fit in. I built a small frame around the sheet so I could space it out from the wall. The frame hangs on the wall using two eyelets to some hooks drilled into the brick itself.
The tune-to sign is made from three Freetronics DMD displays (32×16 red leds each).
Controlling the tune-to sign is an old arduino strapped to the back of the beam.

How I setup my lights – Nativity Scene

This is the fourth post in my series on how I setup my christmas lights

Links to rest of series:

This post focuses on the Nativity scene at the side of the yard.

This is the finished nativity scene. The stable is made from two lengths of wood cut and painted accordingly. The cutouts (Angel, Mary, Joseph, Jesus and two dinosaurs) are all made from marine-ply painted white.
Here is a close-up of two of the cutouts – an Apatosaurus and a Triceratops (chosen by my five year old and three year old receptively. They were made by drawing out the shape on a piece of marine-ply, cutting out with a jigsaw and then painting white.
To light the nativity scene I bought a cheap worklight and replaced the innards with three 12V pixel modules.

How I setup my lights – Arches, candy canes, small spiral trees and large spiral tree

This is the third post in my series on how I setup my christmas lights

Links to rest of series:

This post focuses on the arches along the front, the five candy canes and the small spiral trees

First up at the spiral trees. I have four of these and they were made simply by wrapping a 5m strip around a tomato planet frame I bought from Bunnings. Quick to make and look quite nice when lit up.
Next up are the candy canes. These were originally cheap solar candy canes that I ripped out the lights from and threaded in ten pixels each. They all daisy chain together as if it was a single 50 pixel string.
Behind them you can see the arches along the front of our yard
The arches are made from 1m lengths of pixel strip which are cable tied to the arches. The arches themselves are made from either gas-pex pipe or hula hoops cut in half.
To anchor the arches down I have a small block of wood with two bolts poking up through it. The hula-hoop/gas pipe fits over the threaded part of the bolt. Then the block is pegged into the ground to keep it in place
This is my large spiral tree. It was originally a rope-light spiral but I pulled off the rope light and replaced it with 153 pixels individually cable tied to the spiral. Next to that is an inflatable Santa driving a ute.